USB Tests
Connect USB devices before running USB tests.
Extended Memory Test P02F
5 seconds
Tests memory using pattern 2. This
fails if an error occurs.
Extended Memory Test P03F
5 seconds
Tests memory using pattern 3. This
fails if an error occurs.
Extended Memory Test P04F
5 seconds
Tests memory using pattern 4. This
fails if an error occurs.
Extended Memory Test P05F
5 seconds
Tests memory using pattern 5. This
fails if an error occurs.
Extended Memory Test P06F
5 seconds
Tests memory using pattern 6. This
fails if an error occurs.
Extended Memory Test P07F
5 seconds
Tests memory using pattern 7. This
fails if an error occurs.
Test
Estimated completion time
Description
Test
Estimated completion time
Description
Good Bit
1 second
Checks if the power supply’s good bit
is set. If it’s not set, this could indicate
that the power supply isn’t seated
well, is bad, or that there’s no AC
connected.
Quick
5 seconds
This is available only if you have more
than one power supply. This turns off
the redundant power supplies so that
only one power supply is used.
Test
Estimated completion time
Description
L1 Cache Test
1 second
Verifies that the L1 cache is good on
all processor cores
Test
Estimated completion time
Description
Sensor Reads
1 second
Verifies that the sensor reads are
within the preset sensor limits
Test
Estimated completion time
Description
Presence
1 second
Verifies that a USB device is connected
36
Appendix
AXD Tools Test Reference