Clearing the Test Log
The test log contains all test messages that have occurred during the current AXD
session. If you quit AXD, the log is cleared.
To clear the test log without quitting AXD, click Clear Test Data.
- Apple Xserve Diagnostics 3X103
- >
- Apple Xserve Diagnostics User’s Guide
- >
- Using AXD Tools
- >
- Using AXD EFI Tools
- >
- Clearing the Test Log
Apple Xserve Diagnostics 3X103 - Clearing the Test Log
Apple Xserve Diagnostics 3X103 > Clearing the Test Log
- Apple Xserve Diagnostics User’s Guide
- Contents
- Overview and Requirements
- Setup and Installation
- Starting Up AXD Tools
- Changing the Startup Disk
- Changing the Startup Disk in System Preferences
- Changing the Startup Disk Using the Command-Line Interface
- Changing the Startup Disk Using Apple Remote Desktop
- Changing the Startup Disk Temporarily at Startup
- Starting Up an AXD EFI Tools NetBoot Image Using the Xserve’s Front Panel
- Disabling the Firmware Password
- Changing the Startup Disk
- Using AXD Tools
- AXD Tools Test Reference
Apple Xserve Diagnostics 3X103
Powered by helpnox.com